Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterCable Repair in Boerne, TX
Garage door cable repair in Boerne, TX, typically costs between $150 and $300, depending on the specific cable type, the door’s weight, and the condition of the existing pulleys and drums. When a cable snaps, your garage door will often hang at a crooked angle or refuse to open entirely, creating an immediate security risk for your home. We complete most cable repairs in a single visit, arriving with the right parts on our truck so you are not left waiting with an unusable door. At Mainspring Garage Door Co., we have been serving Boerne homeowners since 1984, and we understand how our local climate impacts your hardware. Our team provides professional Garage Door Repair in Boerne, and we stand behind every repair with our 90-Day Done Right Promise.
If you are experiencing issues with your garage door, please call (830) 365-0775 for a free estimate on our Garage Door Repair services. We have a live person answering our phones 24/7, so you will never reach an automated system when you need help.
When You Need Cable Repair
Garage door cables are the unsung heroes of your door system. They work in tandem with the springs to lift the entire weight of the door. Because they are under constant, high tension, they will eventually show signs of wear. In Boerne, we often see cables fail prematurely due to the humidity and temperature swings that cause rust and corrosion on the wire strands. If you notice any of these signs, it is time to have your system inspected.
- The door is crooked: If your door looks like it is hanging lower on one side than the other when it is closed or moving, a cable has likely stretched or snapped. Do not continue to operate the door, as this puts immense stress on the opener and the remaining cable.
- Visible fraying: Inspect the cables running along the sides of the door. If you see individual wire strands sticking out like whiskers, the cable is compromised and at risk of snapping under load.
- The door won’t lift: If your opener motor is running but the door does not budge, or if it moves a few inches and then stops, the system has likely detected an imbalance caused by a failed cable.
- Loud snapping noise: If you were in the garage and heard a loud pop followed by the door dropping or jamming, a cable has almost certainly failed.
- Cables are dangling: If you see a cable hanging loose from the drum or the bottom bracket, the door is no longer supported correctly. This is a severe safety issue that requires immediate attention from a trained technician.
Cables are under extreme tension. We strongly advise against attempting to adjust or replace these yourself. A snap or release of tension while you are working on the door can cause serious injury. If you suspect your cables are failing, call (830) 365-0775 and let our team handle the dangerous work.
Our Cable Repair Process
At Mainspring Garage Door Co., we believe in doing the job right the first time. We do not cut corners, and we do not use low-quality parts that will fail again in six months. When we arrive at your home, we follow a consistent, safe process to ensure your door runs as intended.
- Safety First Assessment: Upon arrival, we secure the door to prevent it from falling or moving unexpectedly. We inspect the entire door system, including the springs, drums, and rollers, to ensure the cable failure wasn’t caused by another underlying issue.
- Removal of Old Hardware: We carefully release the remaining tension from the system. We never force parts that are bound up; we use the correct tools to unwind the springs safely.
- Replacement with High-Cycle Cables: We install new, high-quality cables that match the exact specifications of your door. Whether you have a heavy wooden carriage door or a standard aluminum panel door, we have the correct gauge and length on our truck.
- System Re-tensioning: Once the new cables are installed, we re-balance the spring system. This is the step most homeowners miss, and it is vital for the longevity of your opener.
- Testing and Verification: We cycle the door multiple times to ensure it tracks straight, closes flush to the ground, and operates quietly.
- Final Inspection: We verify that all safety sensors are aligned and the door auto-reverses properly, ensuring your home is secure and your family is safe.
We believe that a square deal is the only way to do business. We provide our upfront price before we start any work, so there are no surprises on your bill. You can learn more about our home services and how we approach every job by speaking with our team today.
Cable Repair Pricing in Boerne
We know that unexpected repairs are rarely in the budget. Our pricing is based on the quality of the materials we use and the time required to safely calibrate your door. We do not use “bait and switch” tactics. When we provide a quote, that is the price you pay.
| Service Description | Typical Price Range |
|---|---|
| Standard Cable Replacement (Pair) | $150 – $250 |
| Heavy/Custom Door Cable Replacement | $200 – $350 |
| Full System Re-Balance & Calibration | Included with repair |
| Safety Inspection (with any repair) | No Charge |
Factors that affect the final price include the weight of your door, which dictates the thickness of the cable required, whether the drums or pulleys also show signs of wear, and if Panel Replacement is needed. We offer a $50 discount on any repair over $250, and we provide a permanent 5% discount for our senior and veteran customers. If you have received a written estimate from another company, we are happy to provide a free second opinion so you can be confident you are getting a fair price.
FAQs - Cable Repair
Can I fix a broken garage door cable myself?
No, you should not attempt to repair or adjust garage door cables yourself. The cables are connected to the springs, which are under immense tension and can cause severe injury or property damage if handled improperly. Our technicians are trained to manage this tension safely, and we have the specialized equipment required to do the job without risk to you or your home.
How long does it take to replace a cable?
Most cable replacements are completed in a single visit, typically taking between one to two hours. Because our trucks are stocked with a wide inventory of parts, we rarely need to return for a second trip. We respect your time and aim to have your garage door back in working order as quickly as possible.
Do I need to replace both cables if only one is broken?
Yes, we always recommend replacing both cables at the same time. If one cable has failed due to age or wear, the other is likely in the same condition. Replacing only one cable often leads to an unbalanced door, which puts extra strain on your opener and can cause the new cable to fail prematurely. Replacing both ensures the door remains level and the system operates efficiently.
Why did my cable snap?
Cables generally fail due to age, rust, or improper spring tension. In the Boerne area, humidity can accelerate the corrosion of the steel strands within the cable. Additionally, if your garage door is not balanced properly, the cables may be subjected to uneven loads, causing them to fray or snap over time. Regular maintenance helps catch these issues before the cable breaks entirely.
If you have questions about your garage door or need to schedule Garage Door Repair Near Me in Boerne, TX, please call us at (830) 365-0775. We are ready to help you get your garage door running smoothly again. We offer free estimates and are available to answer your call at any time of day or night.
Written by Carl Dutton, Owner at Mainspring Garage Door Co., serving Boerne.